I3 config
From Fiamma
Revision as of 18:41, 16 December 2016 by Pchr8 (talk | contribs) (Created page with "Category: Backup Category: Dotfiles <pre> # i3 config file (v4) # # Please see http://i3wm.org/docs/userguide.html for a complete reference! # # This config file uses...")
# i3 config file (v4) # # Please see http://i3wm.org/docs/userguide.html for a complete reference! # # This config file uses keycodes (bindsym) and was written for the QWERTY # layout. # # To get a config file with the same key positions, but for your current # layout, use the i3-config-wizard # # Font for window titles. Will also be used by the bar unless a different font # is used in the bar {} block below. #font pango:monospace 8 # This font is widely installed, provides lots of unicode glyphs, right-to-left # text rendering and scalability on retina/hidpi displays (thanks to pango). font pango:DejaVu Sans Mono 8 # Before i3 v4.8, we used to recommend this one as the default: # font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1 # The font above is very space-efficient, that is, it looks good, sharp and # clear in small sizes. However, its unicode glyph coverage is limited, the old # X core fonts rendering does not support right-to-left and this being a bitmap # font, it doesn’t scale on retina/hidpi displays. # use these keys for focus, movement, and resize directions when reaching for # the arrows is not convenient set $up k set $down j set $left h set $right l set $ms Mod4 set $alt Mod1 set $ctr Mod3 #Mod3 = Ctrl; Mod1 = Alt; Mod4 = Win # use Mouse+Mod4 to drag floating windows to their wanted position floating_modifier Mod4 # start a terminal bindsym Mod4+Return exec i3-sensible-terminal # kill focused window #bindsym Mod4+Shift+q kill bindsym Mod4+x kill # start dmenu (a program launcher) bindsym Mod4+r exec dmenu_run # start dmenu (a program launcher) bindsym Mod4+n exec i3lock -i ~/I/shashlik.png -t # There also is the (new) i3-dmenu-desktop which only displays applications # shipping a .desktop file. It is a wrapper around dmenu, so you need that # installed. # bindsym Mod4+d exec --no-startup-id i3-dmenu-desktop # change focus bindsym Mod4+$left focus left bindsym Mod4+$down focus down bindsym Mod4+$up focus up bindsym Mod4+$right focus right # alternatively, you can use the cursor keys: bindsym Mod4+Left focus left bindsym Mod4+Down focus down bindsym Mod4+Up focus up bindsym Mod4+Right focus right # move focused window bindsym Mod4+Shift+$left move left bindsym Mod4+Shift+$down move down bindsym Mod4+Shift+$up move up bindsym Mod4+Shift+$right move right # alternatively, you can use the cursor keys: bindsym Mod4+Shift+Left move left bindsym Mod4+Shift+Down move down bindsym Mod4+Shift+Up move up bindsym Mod4+Shift+Right move right # enter fullscreen mode for the focused container bindsym Mod4+f fullscreen toggle # change container layout (stacked, tabbed, toggle split) bindsym Mod4+s layout stacking bindsym Mod4+w layout tabbed bindsym Mod4+e layout toggle split # split in horizontal orientation bindsym Mod3+Shift+h split h # split in vertical orientation bindsym Mod3+Shift+v split v # toggle tiling / floating bindsym Mod4+Shift+space floating toggle # change focus between tiling / floating windows bindsym Mod4+space focus mode_toggle # focus the parent container bindsym Mod4+a focus parent # focus the child container #bindsym Mod4+d focus child # move the currently focused window to the scratchpad bindsym Mod4+Shift+minus move scratchpad # Show the next scratchpad window or hide the focused scratchpad window. # If there are multiple scratchpad windows, this command cycles through them. bindsym Mod4+minus [instance="scratchpad"] scratchpad show bindsym Mod4+t [instance="todo"] scratchpad show bindsym Mod4+Shift+t [instance="term"] scratchpad show # reload the configuration file bindsym Mod4+Shift+c reload # restart i3 inplace (preserves your layout/session, can be used to upgrade i3) bindsym Mod4+Shift+r restart # exit i3 (logs you out of your X session) bindsym Mod4+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'" # resize window (you can also use the mouse for that) mode "resize" { # These bindings trigger as soon as you enter the resize mode # Pressing left will shrink the window’s width. # Pressing right will grow the window’s width. # Pressing up will shrink the window’s height. # Pressing down will grow the window’s height. bindsym $left resize shrink width 10 px or 10 ppt bindsym $down resize grow height 10 px or 10 ppt bindsym $up resize shrink height 10 px or 10 ppt bindsym $right resize grow width 10 px or 10 ppt # same bindings, but for the arrow keys bindsym Left resize shrink width 10 px or 10 ppt bindsym Down resize grow height 10 px or 10 ppt bindsym Up resize shrink height 10 px or 10 ppt bindsym Right resize grow width 10 px or 10 ppt # back to normal: Enter or Escape bindsym Return mode "default" bindsym Escape mode "default" } bindsym Mod3+r mode "resize" # Start i3bar to display a workspace bar (plus the system information i3status # finds out, if available) bar { status_command i3status #workspace_buttons no strip_workspace_numbers yes mode hide modifier Mod4 position bottom } ####################################################################### # automatically start i3-config-wizard to offer the user to create a # keysym-based config which used their favorite modifier (alt or windows) # # i3-config-wizard will not launch if there already is a config file # in ~/.i3/config. # # Please remove the following exec line: ####################################################################### #exec i3-config-wizard # #SH #Startup bindsym Mod4+b border toggle #font pango:DejaVu Sans Mono 0 for_window [class="^.*"] border pixel 1 # switch to workspace bindsym Mod4+1 workspace 1 bindsym Mod4+2 workspace 2 bindsym Mod4+3 workspace 3 bindsym Mod4+4 workspace 4 bindsym Mod4+5 workspace 5 bindsym Mod4+6 workspace 6 bindsym Mod4+7 workspace 7 bindsym Mod4+8 workspace 8 bindsym Mod4+9 workspace 9 bindsym Mod4+0 workspace 10 # move focused container to workspace bindsym Mod4+Shift+1 move container to workspace 1 bindsym Mod4+Shift+2 move container to workspace 2 bindsym Mod4+Shift+3 move container to workspace 3 bindsym Mod4+Shift+4 move container to workspace 4 bindsym Mod4+Shift+5 move container to workspace 5 bindsym Mod4+Shift+6 move container to workspace 6 bindsym Mod4+Shift+7 move container to workspace 7 bindsym Mod4+Shift+8 move container to workspace 8 bindsym Mod4+Shift+9 move container to workspace 9 bindsym Mod4+Shift+0 move container to workspace 10 #additional workspaces bindsym Mod4+apostrophe workspace 11 bindsym Mod4+comma workspace 12:ffi bindsym Mod4+period workspace 13:<span foreground="white">♫</span> bindsym Mod4+F1 workspace F1 bindsym Mod4+Shift+F1 move container to workspace F1 bindsym Mod4+F2 workspace F2 bindsym Mod4+Shift+F2 move container to workspace F2 bindsym Mod4+F3 workspace F3 bindsym Mod4+Shift+F3 move container to workspace F3 bindsym Mod4+F4 workspace F4 bindsym Mod4+Shift+F4 move container to workspace F4 bindsym Mod4+Shift+apostrophe move container to workspace 11 bindsym Mod4+Shift+comma move container to workspace 12:ffi bindsym Mod4+Shift+period move container to workspace 13:<span foreground="white">♫</span> #volume bindsym Mod1+r exec amixer set Master 5%+ && amixer get Master | egrep -o '([0-9]+)%' | egrep -o '[0-9]+' | xargs -0 volnoti-show bindsym Mod1+c exec amixer set Master 5%- && amixer get Master | egrep -o '([0-9]+)%' | egrep -o '[0-9]+' | xargs -0 volnoti-show bindsym XF86AudioMute exec amixer -q set Master toggle #autostart exec ~/s/startup.sh exec xmodmap ~/s/mod4 mode $mode-resize { # These bindings trigger as soon as you enter the resize mode # Pressing h will shrink the window’s width. # Pressing l will grow the window’s width. # Pressing k will shrink the window’s height. # Pressing j will grow the window’s height. bindsym h resize shrink width 10 px or 10 ppt bindsym j resize grow height 10 px or 10 ppt bindsym k resize shrink height 10 px or 10 ppt bindsym l resize grow width 10 px or 10 ppt # same bindings, but for the arrow keys bindsym Left resize shrink width 10 px or 10 ppt bindsym Down resize grow height 10 px or 10 ppt bindsym Up resize shrink height 10 px or 10 ppt bindsym Right resize grow width 10 px or 10 ppt # back to normal: Enter or Escape bindsym Return mode "default" bindsym Escape mode "default" } # keybinding to do all startup stuff bindsym Mod4+Shift+g --release exec bash ~/s/startup.sh bindsym Mod4+g --release exec xmodmap ~/s/mod4 #Pedal # Running programs bindsym Mod3+v exec vimb bindsym Mod3+e exec thunar bindsym Mod3+a exec chromium bindsym Mod3+o exec chromium --incognito # Terminal programs # Todo: in own workspace bindsym Mod3+n exec --no-startup-id i3-msg "exec urxvt -hold -e newsbeuter" bindsym Mod3+m exec --no-startup-id i3-msg "exec urxvt -e mutt " bindsym Mod3+equal exec "urxvt -name scratchpad -e vim __scratchpad" bindsym Mod3+Shift+t exec "urxvt -name todo -e vim T" # Service programs bindsym Mod3+p exec pavucontrol bindsym Mod3+Shift+l exec i3lock -i ~/I/shashlik.png -t # Screenshots bindsym Mod3+s --release exec scrot -s -e 'mv $f ~/s/screenshots && nomacs ~/s/screenshots/$f' bindsym Print --release exec scrot -s -e 'mv $f /tmp/ && nomacs /tmp/$f' #Moving bindsym Mod3+$left workspace prev bindsym Mod3+$right workspace next #Random for_window [class="(?i)pavucontrol"] floating enable, move position mouse for_window [class="(?i)pavucontrol" instance="pavucontrol-bar"] move down 34 px for_window [class="nomacs"] floating enable, move position mouse #https://github.com/Airblader/dotfiles-manjaro/blob/master/.i3/config for_window [window_role="pop-up"] floating enable for_window [window_role="bubble"] floating enable for_window [window_role="task_dialog"] floating enable for_window [window_role="Preferences"] floating enable for_window [window_type="dialog"] floating enable for_window [window_type="menu"] floating enable assign [class="^URxvt$" instance="^irssi$"] → 3